DZ-Type Rotatry Steel Belts Granulation Machine

1.Application:

  The plant is applied to products with the melting point below 250 ℃ for curing and shaping. Typical applied materials include: Sulphur, Paraffin Wax,Resin,Asphalt,Maleic Anhydride, Trimellitic Anhydride, Salt Stearate, Hot-Melt Adhesives, M-Phenylenediamine, Urea, Rubber and Plastic Auxiliary etc.

 
2.Technical parameters:

Model

Dimension(mm)

Capacity(Kg/h)

Total Weight(Kg)

DZ0.6-6

7500×1250×1650

50-80

1250

DZ0.6-10

11500×1250×1650

100-200

1400

DZ0.6-12

13500×1250×1650

200-350

2200

 

 

 

 

DZ1.0-8

10000×1650×1950

100-200

2500

DZ1.0-10

11500×1650×1950

200-300

2850

DZ1.0-12

13500×1650×1950

250-400

3200

DZ1.0-13.5

15000×1650×1950

400-600

3500

DZ1.0-15

16500×1650×1950

500-800

3800

 

 

 

 

DZ1.2-9.5

11000×1870×1950

200-300

3000

DZ1.2-12

13500×1870×1950

250-450

3280

DZ1.2-13.5

15000×1870×1950

300-500

3500

DZ1.2-15

16500×1870×1950

500-800

3850

DZ1.2-17.5

19000×1870×1950

700-1100

4000

DZ1.2-20

21500×1870×1950

850-1300

4250

DZ1.2-22

23500×1870×1950

1000-1400

4500

 

 

 

 

DZ1.5-15

16500×2250×1950

500-800

3850

DZ1.5-17.5

19000×2250×1950

700-1200

4000

DZ1.5-20

21500×2250×1950

800-1200

4500

DZ1.5-22

23500×2250×1950

1000-1500

4850

DZ1.5-25

26500×2250×1950

1200-1500

5200

DZ1.5-28

29500×2250×1950

1000-2000

5600

DZ1.5-30

31500×2250×1950

1000-2000

6200
 Above parameters are only for reference, specific data should be based on actual material.

3.Working principle:

  DZ Type Pastillator makes the molten material flowing from the upstream process drop to the steel belt moving at a uniform velocity.The upward spary cooling and water returning device is provided below the belt to insure that the molten material speading uniformly on the belt may be cooled and cured in the course of being conveyed to the discharg end.On the basis of the properties of the material and requirements for use, different operating modes of and mechanisms for intermittent dropping, continuous bar output or full-width overflow may be selected for the material distributing device so as to yield himisphere,strip or flake shaped products.